Injector attack puts application using other Honda

Bicycle friends on several occasions based on the theory of adding capacity to burn commer, I also need to add debit gasoline, aka fuel to be a little wasted. Designed to mix fuel and air can achieve the amount of machine. The principle is the same as filling out a larger bucket, which means the water is pouring necessary as well as full. Well, the difference is that the injection engine is not easy just by replacing the main jet and pilot jet like a carburet motor. Have a dilemma, if the replacement of my injector beat up in a larger injector is enough? Will be shocked? Let’s read until it’s done.

Cheap putting Injector Beatfittution

Honda Injection Motor Rider Like Scoopy, Honda Beat, Sotia, Vario 125, PCX 125 and Supra X 125 fi 125 fi 125 fi especially those who want to have a machine in the aftermarket in Honda. Obviously, the Motorbike of the Indeyksbike I mentioned earlier exchanging each other alternating the alias of other Honda motorcycle injectors, just think that you use the injector. For example, the beating of me resurrected yesterday at 120cc, could use vario 125 or PCX 125 injector. The form and dimensions of injector are the same. Only different spray skills.

That is, every race can be replaced with each other, more friendly the tag, for example 125 Keahin vario injector price of RP 135 thousand. While it has a PCX 150 large amounts to only RP 240 thousand and the most expensive CB150 or CBR 150R valued in RP 350 thousand.

Read again: Dilute Engine Oil makes motor power

Application Application for Motor Oprekan

Confused, which injector will be used? Benchmark quickly, eg the new Honpe Peat Sambore wants to be bibore up to 125cc or 130cc, you can use the injector vario 125. Or if you want to 150CC only, CB150R streetfire or CBR 150R again. Because at a high machine speed, the injector belongs to the CB / R 150R is heavier flow than Vario 150 so the power is higher for the Obretan motor.

The advantage of using the original injector of the original Honda is in the dock diameter or at least the swollen hole compared to other products. Is only, 0.130 mm (acquire Honda). While the resulting effect, gasoline blasts are more foggy, aka small particles in fog. To mix air and gasoline can be more homogeneous.

There is a cure if you want to give birth to the injection motor not just corrected in size or small injector ability. You also need to pay attention to time settings to ignition each RPM, especially those who follow the injection system Slus Loop. May not be very effective though it has changed the injector as any no ECU support or Piggyback right. Don’t forget to reset TPS after the injector change, the Belipart YouTube Channel manner.