7 This error makes a motorcycle going to the machine!

Dangerous! 7 Motorcycle-Makers Mistakes should go to the machine!

Imagine you use your favorite motorcycle every day to go to work, college, or just hang out. Every morning it’s normal, the road is better, no signs of problems. But one afternoon, when I wanted to go home, the motorcycle suddenly died suddenly. After attempting to start it many times don’t. Brought to the workshop, the mechanic then said: “The machine should on the machine Here, Bang. “

Been shocked? Clearly. Been annoyed? Sure that. Especially if you hear the estimated healing costs will be millions of rupiah. Although all the time you feel the motorcycle is good. Well, this story has been very well understated by people who are less sensitive to the first signs of engine damage or regularly performed the habits that have been wrong.

So that you do not experience the same thing, discuss more about Motorbike is exhausted by the machineWhat is the matter, mistakes that often make the machine damaged, with motorcycle tips to unable to spend.

Is that on the machine?

Machine drinking is not just unloading ordinary motorcycles. This term is used in the Motor Machine completely uncovered Because there is a serious injury inside the machine, usually in the piston, cylinder, piston ring, crankshaft, or valve. The process is complex, it’s been a long time, and a great cost.

Often, the machine fell into the machine because it is severe damage and cannot be overcome by gentle service. Well, this serious injury often emerges because of the noorizing habit of being truly avoided if the motorcycle owner is more concerned with caution in usual.

7 Motorcycle-Maker Mistakes should go to the machine

1. Repentance Oli

The oil is the blood of the machine. The main function is to lubricate the ingredients so friction is smooth and the machine remains cold. If the oil is rarely replaced, after a long time it becomes thick, dirty, and it is not well lubricated. As a result, the friction between substances increases, the machine is easily worn, and can be perfectly jamed.

Motorcycle case by jim Because the late replacement oil often occurs. If jam, the only solution is to break the machine, aka to the machine.

2. Use of oil without regard

Each motor has different oil details, from the level of thickness (SAE) to API service. If you use ignoring oil more runny or thick, the machine is not lubricated properly. Impact can make warm ingredients easily and disappear.

This error is often regarded as important, even if the high effect may be the motor must come down to the machine.

3. The overheat ignored

Do you feel a motorcycle suddenly hot to the point? This is a sign that the machine is experiencing soup. If the left unattended, the overheat is able to jam to the piston, the cylinder of the berret, until the head of the cylinder curved. And yes, finally need to go to the machine too.

Overheat is usually caused because the cooling system does not work optimistic. It may be radiator flowing, the fan is dead, or the radiator water is running. For motorcycle air -cooled motor, the dirty machine of fins can also get tough to go out.

4. Two series of opaque

Common service is important to check the condition of air filters, spark plugs, carburators / injectors, and cooling systems. If you are lazy to serve, many dirty or worn components that finally interfere with machine work.

A simple example: The clogged air filter makes burning incense. Over time, the rest of the burn can crust the burn room. If not distracted, this crust can damage the piston or valve.

5. Super Motor Geber

Gaspol continued to make extra work machine. Especially when used in the road or heavy burden without stopping. The machine can be heated immediately, the piston is burdened, and the risk is higher.

This practice is often made by young drivers who want to accelerate. Although long-long side-effects can go to the motorcycle to go to the machine.

6. Change of machines without calculation

Many want the engine that claims, replace the racing recovery, or attach to large carrors to make the motor more fierce. The problem is, if this again is not balanced in correct settings, burning may not be balanced. The machine works outside of its normal capacity.

The result? Engine components will burn faster, excessive heat, and machine life can be short. Many modif motorcycles that finally go down to a child’s machine.

7. ignores the initial sign of damage

The machine is not completely damaged immediately. There are always early signs, such as:

• Sound of machine
• Pain in white / dark smoke
• Oil is running immediately
• Motor always dies suddenly
• Attract to be heavy

Unfortunately, many motorists pretend not to care. Even if it is attached immediately, the problem can be solved by minor improvements. But because ignored, the damage is aggravated and finished with the machine.

Machine Change Expenses: Don’t Underwrite

Many surprised her hearing the cost of the machine. For motorcycles or automatic motorcycles, cost scope can start 1.5 million to 3 million rupiah. But if the motor sport is 250cc and above, it can penetrate more than 5 million. Also depends on the damage and price of substance replaced.

Don’t forget, processing time is long enough. Be a few days in weeks. So your MOTORMIKE should be “unemployed” in the garage.

How to make motor from machine

Instead of leaving a big expense, it’s better to be restrained than today. Here are some simple steps you can do:

1. ROUTINE OIL CHANGES according to manufacturer’s recommendations.
2. Use quality fuel and according to recommendations.
3. TIME SERVICE Every 2000-3000 km or as needed.
4. Continue machine temperature With a radiator, fan, and machine final examination.
5. Don’t change the engine again.
   
6. Sensitive to the same sign of damage And brought it right into the garage if there were odd symptoms.

In this step, the machine life can take a long time and the motor performance is maintained.

Motorcycle repair machine effects for sale

Something rarely think The amount of motorcycle sales. Motorcycles coming down to the machine usually sleep in price shopping. Why? Because buyers know that the machine has a problem, the higher the risk of redemption.

So, if you want a motorcycle with a long sales price, take care of it right. There are routine service records, change oil in time, and don’t leave the engine until it’s bad damaged.

Closing: Take care of the motorcycle, keep the amount of sale

Motorbike is exhausted by the machine a nightmare for motorcycle owners. Besides the great cost, the motorcycle is also worth selling it. But all this can be blocked when you care more about treatment.

Remember, healthy motorcycles are not only comfortable wearing, but can also be sold as higher if sold. Well, if you want to sell used motorcycles in a practical way, try Mofe’s fast bargain. The process of selling, fast, and the price offered will remain fair.

Or if you think of changing motorcycle, just check Used Motor Stock on MOFE. Many options on quality motorcycles checked for conditions, so you don’t have to worry about the problem unit.

Take care of motorcycles now, enjoy high selling price later. And if it’s time to change, I Ready to be your closest partner!