Not only the oil, also check this component before rolling on August 17

It has been a habit that 17 Aug. Holidays, some bikers want to change to translate the meaning of freedom. In preparation, check the ingredients rapid transfer Anyone need to be examined, care or even replaced before the tour 17s. It means the mountain remains smoothly with no barrier on the road. Unfortunately not all motorists have an understanding to ensure that all of these substances are in good condition or not. What else, the steps and times of examination of each part of the age is different. So there is a possibility of time difference or distance when the replacement process includes part category rapid transfer. The following is a guide to check it.

Engine Oil Change before traveling August 17

The engine oil has an hour to replace every 2,000 – 3,000 km or usually every 2 months. If the odometer distance is closer to the turn time limit, you need to change the new one. Yes, right? Instead of bothering you should change oil in the middle of the trip. It’s not that friend, it is to keep the motor performance to vary distances and long. If the oil is not available for a long time, even if not replaced, it is good as long as it does not exceed the limit on the kilometer replacement oil. As the distance used, oil quality decreases and facilitate tears in the face breaks, even the amount of oil can be reduced.

Check the feasibility of the spark plug

Also the spark plugs, recommended to check first before invited to tour August 17. Because, this substance has a tempo to check every 3,000 km and should be replaced every 6,000 months. And if it goes through that limit, there are usually charcoal deposits or even spark plugs in electrodes. So it’s important to feel that the motor feels less powerful until the machine is harder to live in the morning. Well, if the status of your motorcycle spark plug is still good, you can still go on the road.

Don’t worry if the spark plug is looking dirty even if it’s replaced, there’s a way to overcome it, friend. This situation has occurred due to the use of fuel class that does not agree with the octant in machine details. It is one of the reasons for incomplete combustion. Just replace the use of fuel good verses.

In fact, the busi has nature cleaning one’s ownSo bikers don’t have to regret cleaning spark plugs. He cleans himself from a clump of carbon for some time and condition. Process cleaning one’s own It starts when the machine reaches the temperature of 500 ° C to 800 ° C. and the machine received on the machine 60 – 100 km / hour. This means that spark plugs can live high and act optimistic when the comming chamber situation is in the right way.

Read the article how to clean the spark plugs in full by clicking Here.

Chain again + gear or v-belt (Matic)

For replacement chain of wheel-driven, no time limit. But almost all mechanics suggest to check the chain components every 4,000 km. You make it by washing the chain before lubricated. Even without the time limit of replacement. To ensure the wheel chain should be replaced by viewing the chain. If it breaks the distance to the earring bolt settings, it should be replaced with new, shocked leap chain and escape from the gear. You need to change the chain of a set and gear. Because when Gir Taper’s eyes are, even if a new chain is installed not really strong.

Also apply the matic, the difference is to replace the V-belt section. Severe situations appear within CVT belt have a crack.

Identify the signs of CVT components with trouble, prevent damage worse

Check the wheels before going round on August 17

In all that, the most important component and should check further, which is thickness of groove or wheel development. Because wheels wheels are tired, it is possible to cause motor balance to be disrupted. Although braking, the motion above the paved wheel is less than. This symptom can cause slippage if the road is slippery. And worse the wheels are also easy to overlook.

But it is more important to check the thickness of the wheel’s progress if you want to travel away. Because if the limit for the use of flowers on the wheel exceeds the size of 1.6 mm well, the wheel is new. That is safe. Do not achieve less than 1.6 mm.

Check the brake lining

The time to replace disc brakes and drum brake lining is not far from the driving chain. Which is recommended to check it once per 4,000 km. To check the deadline for replacing the drum brake lining, it’s easier. Can be tracked by a designated needle in the drum lever.

As for the disc brake device, to ensure the canvas thickness can be secked from the number of fluid in the brake brake. Or if you want to be a little distracting, look at the depth of canvas gesture when it starts flat. Because it is a sign that canvas are asked to be replaced.